LY-WR型步入式恒温恒湿试验室
Walk-in Constant Temperature & Humidity Test Chamber
用途Uses：本产品为产业界提供大型零件、半成品、成品之大型温湿度测试环境设备。特别适用于光伏，光纤,LED,晶体,电感,PCB,电池,电脑,手机等产品的耐高温,耐低温,耐潮湿循环试验
This product is to provide large parts industry, semi-finished products of the large temperature and humidity test environment equipment.Is suitable specially in the light bends down, the optical fiber, LED, the crystal, the inductance, PCB, the battery, the computer, product and so on handset thermostabilities, bears the low temperature, bears the moist circulation test
特性Characteristics：
内容积可任意放大、缩小,随使用者环境需求而设.组合式库板,拆装方便,结构简单采用对臭氧系数为零的绿色环保(HFC)制冷剂R404、R23.宽敞明亮之大视窗配高亮度室内防爆,让使用者可随时观察步入式恒温恒湿试验室测试室内的状况.全方位的**保护装置及停电记忆,确保机器本身及使用者**采用天花板吹出型,减少试验室内的风速对试样的影响,同时能做到低风速高均匀度的要求.可连接电脑、记录仪(选配). Content product can be any enlargement, reduction, designed with the needs of the user environment. Modular library board, easy accessibility, simple structure with a zero coefficient of ozone green (HFC) refrigerants R404, R23. Spacious and bright and large windows proof room with high brightness, so that users can observe the walk-in constant temperature and humidity conditions indoors laboratory tests. a full range of security devices and power memory to ensure the safety of users using the machine itself and blow ceiling type, reduce testing indoor sample of wind speed on the same time able to do low-speed high uniformity requirements. can be connected to the computer, the recorder (optional).
满足标准Design standard:
GB/T 10589-2008 低温试验箱技术条件
GB/T 10586-2006 湿热试验箱技术条件
GB/T 10592-2008 高低温试验箱技术条件
GB/T 2423.1-2001 (IEC68-2-1) 低温试验Aa,Ab
GB/T 2423.2-2001 (IEC68-2-2) 高温试验B
GB/T 2423.3-2004(IEC68-2-3)恒定湿热试验Ca
GB/T 2423.4-2008(IEC68-2-30)交变湿热试验Db
GB/T 2423.34-2005、MIL-STD883C方法1004.2温湿度组合循环试验
技术参数Specifications：
| 规格型号Model | 步入式恒温恒湿试验室LY-WR型 |
| 温度范围Tempetature range | -60℃～85℃, -35℃～85℃ ,-20℃～85℃ |
| 湿度范围Humidity range | 20%～95%RH/15%～10%RH |
|
稳定度 | 温度Tempetature | ±0.5℃ |
| 湿度Humidity | ±2%RH |
| 分布均匀度 | 温度Tempetature | ±2℃ |
| 湿度Humidity | ±5%RH |
| 温湿度偏差Deviation of temperature and humidity | ≤±2℃/±3%RH |
| 升温时间heat time | 依箱体大小而定According the size of the chamber |
| 降温时间cool time | 依箱体大小而定According the size of the chamber |
| 结构尺寸Structure size | 依客户所需订制Customized according to customer requirements |
| 结构材质StructuralMaterials | 拆装组合步入式库板，内箱：SUS304#钢板；外箱:彩钢板；保温层:PU发泡；底座:国标角铁+槽钢Combination of a walk-in library board disassembly, the case: SUS304 # plate; outside the box: color plate; insulation layer: PU foam; Base: GB angle iron +channel |
| 冷冻系统Refrigeration System | 进口全封闭或半封闭式压缩机，散热片式蒸发器兼作除湿器 Closed or semi-closed imported compressor, evaporator heat sink doubles as a dehumidifier |
| 加热、加湿系统Heating, humidification system | 加热:不锈钢鳍片式加热管加热空气方式；加湿:不锈钢护套式电热蒸汽发生装置 Heating: Stainless steel fin tube heating the air heating mode; humidification: stainless steel sheath-type electric steam |
| **保护装置Safety Devices | 无熔丝过载保护，压缩机过热、过流、超压、加热、加湿干烧、水箱缺水警报系统No fuse overload protection, the compressor overheating, over current, over-pressure, heating, humidifying dry, water tank alarm system |
| 控制器Controller | 大型LED显示多功能，扩展性强之专用控制器Large LED display function, and strong expansion of the dedicated controller |
| 标准配置Standard accessories | 测试孔（φ50×1只） 室内防爆灯Test hole (φ50 × 1 only) Indoor proof lamp |
| 功率(kw) Rate of Work | 依箱体大小而定According to box the size of the |
| 电源Power | AC 3φ 5W 380W/50Hz |